Code CR 2500 Manuel d'utilisateur télécharger pdf (Page 51)

C004386_07_CR2500_ User_Manual - 45

Save Settings

To nd out the Reader ID and rmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read

the following code:

Reader ID and Firmware

You will see a text string indicating your rmware version and CR2500 ID number (see below):

Xap/i - Code Internal ID (not applicable)

VVVV is the application rmware version number

WWWW is the bootloader rmware version number

XXXX is the radio rmware version number

SSSSSSSSSS Reader’s serial number (ten digits)

P is “A” if running rmware is the application, “B” if BootLoader

XXX-XX+XX - Internal ID (not applicable)

Example:

Xap/i3000300006040010002363A06D-SD+SQ

Note: Code will periodically release new rmware for CR2500 readers. For information on latest rmware versions, call

Code at (801) 495-2200. To upgrade rmware, please visit our website at http://www.codecorp.com/codesupport.php

and follow instructions provided.

4.8 - Reader ID and Firmware Version

4.9 - Reader Settings Lock

To lock or unlock the current settings on your reader please scan the codes below:

Reader Settings Locked Reader Settings Unlocked

Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX

This mode can be used to establish a permanent connection between the reader and a CodeXML® modem. Prepare the

reader to communicate in ‘RF Comm Mode’ by scanning the QuickConnect code on the paired modem to which you wish

to establish a permanent link. Listen for the single beep to verify the connection acknowledgement. Scan the Lockout Link

Mode code (see below). Set appropriate timeout settings, if applicable (see Section 1.4.4).

To reassign a permanent connection to a different reader, scan the unlock link code. Using the ‘new’ reader’ follow the

directions outlined in the previous paragraph.

4.10 - Lock-out Link Mode

NOTE: Prex and Sufx programming

codes, memory transfer and delete

commands, “Clear All CodeXML®

Rules” and “Sufx -Erase/None”

commands are not locked by this

feature.

Lockout Link Mode Unlock Link Mode

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 61 62

Pas de commentaire

Code CR 2500 Manuel d'utilisateur Page 51