Code Reader 3500 Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Lecteurs de codes-barres Code Reader 3500. CR3500 Accessories: Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
CR3500 as a USB Keyboard
CR3500 as a PS/2 Keyboard
1. Attach the USB cable (Figure 5 for cable types) to the CR3500.
2. Connect the USB cable to a USB port (Figure 6) on the computer.
There is no need to power off the computer.
3. Once properly connected, the CR3500 will power on and beep.
4. Scan the following code for USB Keyboard mode:
5. Scan the Save Settings code (M188_02) on page 3.
1. Power off the computer. If you disconnect the computer’s keyboard
while it is powered on, your computer will lock up.
2. Attach the PS/2 cable (see Figure 5 for cable types) to the CR3500.
3. If you have a cabled keyboard, detach the keyboard cable from
the computer and connect that same connector to the female
connection on the CR3500 PS/2 cable (Figure 7).
4. Now connect the male CR3500 PS/2 connector into the keyboard
port on the computer (Figure 8).
1. Attach the RS-232 cable (see Figure 5 for cable types) to the CR3500.
2. Connect the RS-232 cable to a serial port on the computer. There is no need to power off
the computer.
3. The RS-232 interface has an optional 5V/1.5A power supply. If you have a power supply,
plug the power supply adapter into the RS-232 cable and then plug the power adapter
into a wall socket.
4. Once properly connected, the CR3500 will power on and beep.
5. Scan the following code for RS-232 (Serial) mode:
6. Scan the Save Settings code (M188_02) on page 3.
Note: To power on an uncabled CR3500, the reader
must have a working battery (not a battery blank).
Press and hold red button for at least one second to
power on.
Figure 7
Figure 8
USB Keyboard Factory Reset
Figure 6
CR3500 as a RS-232 (Serial)
All other USB settings (including Virtual COM set-
tings) may be found in the CR3500 User Manual
at: www.codecorp.com/manuals.html
RS-232 Factory Default Settings
Mode: RS-232 One Way Mode Max Range
Baud Rate: 57600
Stop Bits: 1
Data Bits: 8
Parity: None
To save changes made to the CR3500
con guration, scan the following code:
All other Serial settings can be found in the CR3500 User Manual at: http://www.codecorp.com/manuals.html
Figure 5
PS/2 Keyboard Factory Reset
All other PS/2 settings may be found in the
CR3500 User Manual at: www.codecorp.com/
manuals.html
5. Power on the computer. The CR3500 is powered by the PS/2 port and does not require a
power supply.
6. Once properly connected, the CR3500 will power on and beep.
7. Scan the following code for PS/2 Keyboard mode:
8. Scan the Save Settings code (M188_02) below.
RS-232 Factory Reset
RS-232 Mode
No Power Supply
Save Settings
Save Settings
Powering on a CR3500
C004418_03_CR3500_Cabled_Quickstart
2
C004418_01_CR3500_Cabled_Quickstart
3
CR3500 Accessories:
Handles
Battery Handles
Battery Chargers (single)
Lanyard Hook Attachment
Reader Stand
Visit www.codecorp.com for
information on all Code readers and
accessories.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - CR3500 Accessories:

CR3500 as a USB KeyboardCR3500 as a PS/2 Keyboard1. Attach the USB cable (Figure 5 for cable types) to the CR3500. 2. Connect the USB cable to a

Page 2 - Code Reader 3500 - Cabled

Quickstart GuideHand Held CR3500 - To install a cable directly to the CR3500, correctly line up the 8-pin DIN connector into the back end of the unit.

Commentaires sur ces manuels

Pas de commentaire