Code CR3600DPM Informations techniques télécharger pdf (Page 35)

10/29/2014

Page 35 of 72



12393 South Gateway Park Place Suite 600, Draper, UT 84020



(801) 495-2200



FAX (801) 495-0280

Reg

Setting Name

Default

(Hex)

Comment

Send And Store Mode

0: Normal mode (buffered send)

1: Send and log mode

3: Log only mode

Note: Only applies to readers using Bluetooth communication

modes.

Also see register: B4. Reader will not allow the user to set auto-

reconnect on, and store data. If any setting that allows storing data

is turned on, auto-reconnect will be turned off (if it is on).

Settings Lock

1: Settings unlocked

3: Settings locked (except settings Lock)

Tri-Optic Options

Binary Dip Switch

Bit

Controls

Value

Tri-Optic Decoding, Normal

Quiet Zones

0: Disabled

1: Enabled

Allow Short Quiet Zones

0: Disabled

1: Enabled

No Quiet Zones Required

0: Disabled

1: Enabled

Reverse order of first and

second halves

0: Disabled

1: Enabled

Note: Bit 3 is supported in CD 14.1.2+

Motion Detection:

Event

Valid Range: Any event as defined in register 39 and re-listed in C4

Motion detection is enabled by setting register C4 to 0xF0.

This register is reset to 0 (disabled) when register C4 is changed

away from 0xF0. When motion is detected, this event is posted.

See register 39 or C4 for list of events.

Also see registers: 204, 20E

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Code CR3600DPM Informations techniques Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de codes-barres Code CR3600DPM